 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MOTOROLA SEMICONDUCTOR TECHNICAL DATA 520MHz Dual Modulus Prescaler The MC12025 is a dual modulus prescaler which divides by 64 and 65. Supply voltages of 4.75 to 5.25V may be connected to Pin 8. MC12025 MECL PLL COMPONENTS /64/65 DUAL MODULUS PRESCALER * * * * * 520MHz Toggle Frequency Low-Power 9.5mA Typical Control Input Is Compatible WIth Standard CMOS and TTL Operating Supply Voltage of 5.0V 0.25V Propagation Delay 30ns Typical MAXIMUM RATINGS Symbol VCC TA Tstg Characteristic Power Supply Voltage, Pin 8 Operating Temperature Range Storage Temperature Range Range -0.5 to 7.0 -40 to +85 -65 to +175 Unit Vdc C C ELECTRICAL CHARACTERISTICS (VCC = 4.75 to 5.25V; TA = -40 to +85C) Symbol fmax fmin ICC VIH VIH Vout Vin Characteristic Toggle Frequency (Sine Wave Input) Supply Current Control Input HIGH (/64) Control Input LOW (/65) Output Voltage Input Voltage Sensitivity 30MHz 100-520MHz 0.8 400 100 1.2 800 800 2.0 0.8 Min 520 30 9.5 13.5 mA V V VPP mVPP D SUFFIX 8-LEAD PLASTIC SOIC PACKAGE CASE 751-05 Typ Max Unit MHz P SUFFIX 8-LEAD PLASTIC PACKAGE CASE 626-05 tPLL PLL Response Time1 tout-422 ns 1. tPLL = The period of time the PLL has from the rising output transition to the Modulus Control input edge transition to ensure proper modulus selection 2. tout = Period of output waveform PRESCALER BLOCK DIAGRAM 8 VCC Modulus 1 Control Input 0.001F 6 Signal Input 5 0.001F /N / N+1 3 Output Pinout: 8-Lead Plastic (Top View) VCC 8 NC 7 Input 6 Input 5 1 MC 2 NC 3 Out 4 GND 4 GND 1/97 (c) Motorola, Inc. 1997 1 REV 3 MC12025 OUTLINE DIMENSIONS P SUFFIX PLASTIC PACKAGE CASE 626-05 ISSUE K NOTES: 1. DIMENSION L TO CENTER OF LEAD WHEN FORMED PARALLEL. 2. PACKAGE CONTOUR OPTIONAL (ROUND OR SQUARE CORNERS). 3. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 8 5 -B- 1 4 F NOTE 2 -A- L DIM A B C D F G H J K L M N C -T- SEATING PLANE J N D K M M H G 0.13 (0.005) TA M MILLIMETERS MIN MAX 9.40 10.16 6.10 6.60 3.94 4.45 0.38 0.51 1.02 1.78 2.54 BSC 0.76 1.27 0.20 0.30 2.92 3.43 7.62 BSC --- 10_ 0.76 1.01 INCHES MIN MAX 0.370 0.400 0.240 0.260 0.155 0.175 0.015 0.020 0.040 0.070 0.100 BSC 0.030 0.050 0.008 0.012 0.115 0.135 0.300 BSC --- 10_ 0.030 0.040 B M A 8 D 5 D SUFFIX PLASTIC SOIC PACKAGE CASE 751-05 ISSUE R C H 0.25 M E 1 4 B M NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. DIMENSIONS ARE IN MILLIMETERS. 3. DIMENSION D AND E DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 PER SIDE. 5. DIMENSION B DOES NOT INCLUDE MOLD PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 TOTAL IN EXCESS OF THE B DIMENSION AT MAXIMUM MATERIAL CONDITION. DIM A A1 B C D E e H h L MILLIMETERS MIN MAX 1.35 1.75 0.10 0.25 0.35 0.49 0.18 0.25 4.80 5.00 3.80 4.00 1.27 BSC 5.80 6.20 0.25 0.50 0.40 1.25 0_ 7_ B C e h A SEATING PLANE X 45 _ q 0.10 A1 0.25 B M L CB S A S q Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution; P.O. Box 5405; Denver, Colorado 80217. 303-675-2140 or 1-800-441-2447 MfaxTM: RMFAX0@email.sps.mot.com - TOUCHTONE 602-244-6609 INTERNET: http://Design-NET.com JAPAN: Nippon Motorola Ltd.; Tatsumi-SPD-JLDC, 6F Seibu-Butsuryu-Center, 3-14-2 Tatsumi Koto-Ku, Tokyo 135, Japan. 81-3-3521-8315 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852-26629298 MOTOROLA 2 MC12025/D HIPERCOMM BR1334 -- Rev 4 |
Price & Availability of MC12025
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |